Xorg.conf for the PVR-350

This is the Xorg file for the PVR-350

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
#        ModulePath   "/usr/X11R6/lib/modules/extensions/nvidia"
#        ModulePath   "/usr/X11R6/lib/modules/extensions"
#        ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
 
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#       Option  "Xleds"         "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#       Option  "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#       Option  "XkbModel"      "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#       Option  "XkbModel"      "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#       Option  "XkbLayout"     "de"
# or:
#       Option  "XkbLayout"     "de"
#       Option  "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#       Option  "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#       Option  "XkbOptions"    "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option      "XkbRules" "xfree86"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
        Identifier  "DevInputMice"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier  "NTSC Monitor"
        HorizSync  30-68
        VertRefresh 50-120
        Mode "720x480"
          # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz
          DotClock 34.564
          HTimings 720 752 840 928
          VTimings 480 484 488 504
          Flags    "-HSync" "-VSync"
        EndMode
EndSection

Section "Device"
        Identifier  "Hauppauge PVR 350 iTVC15 Framebuffer"
        Driver      "ivtvdev"

        ### change fb1 to whatever your card grabbed
        Option      "fbdev" "/dev/fb1"
        Option      "ivtv" "/dev/fb1"

        ### change the BusID to whatever is reported by lspci,
        ### converted from hex to decimal
        BusID "PCI:1:9:0" # lspci says 00:09.0
        ### More examples
        #BusID "PCI:0:10:0" # lspci says 00:0a.0
        #BusID "PCI:1:14:0" # lspci says 01:0e.0
        #BusID "PCI:0:5:1" # lspci says 00:05.1
EndSection

Section "Screen"
        Identifier  "Screen0"
        Device      "Hauppauge PVR 350 iTVC15 Framebuffer"
        Monitor     "NTSC Monitor"
        DefaultDepth 24
        DefaultFbbpp 32
        Subsection "Display"
          Depth 24
          FbBpp 32
          Modes "720x480"
        EndSubsection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection